Furuno FCV-1900/B/G Installation Manual page 17

5. Pass the A-TO-D ADAPTER cable and USB cable through the super-gland from
inside.
6. Pass the gasket assembly onto the cable.
7. Insert the assembly into the seal nut, then tighten the seal nut.
Seal nut
8. Connect the monitor cables and the USB cables to the monitor, referring to the
following figure.
DVI (M)
USB
Type B
HDMI-TO-DVI
5.3/10.3m
RNS-08-132
5m
Adapter
9. Close the cover.
Waterproofing the connectors
Wrap the connectors with vulcanizing tape and then wrap with vinyl tape. Bind the tape
ends with a cable-tie.
Cable-tie
Vulcanizing tape
Gasket assembly
MU-190/150/231
HDMI
connector
CN-4
Type A
USB cable
(local supply)
F-F, local supply
Connector
10
Super-gland
FCV-1901
A-TO-D ADAPTER
USB Monitor
Micro-B HDMI-D
J105 J101
MAIN 19P1084
Vinyl tape
2. WIRING