Conference A Call; Mute/Unmute A Call; Adjust The Volume Of A Call; Set The Ring Type For The Wireless Telephone - Avaya 3606 User Manual

Avaya 3606 Wireless IP Telephone User's Guide

Conference a call

1. While active on the call, press the FCN key and the 4 key.
The call is placed on hold, the line number for the call on hold flashes, and
you hear dial tone.
2. Dial the telephone number of the person you want to add to the call.
3. Wait for the person to answer.
4. To add the person to the call, press the FCN key and the 4 key. The display
shows "Conference X" (X equals number of parties on the conference,
minus 1).
5. Repeat Steps 1 through 4 to add other calls to the conference.

Mute/unmute a call

To mute a call, press the FCN key and the 1 key.
The call is muted. The display shows "<Muted>".
To unmute a call, press the FCN key and the 1 key again.

Adjust the volume of a call

The wireless telephone has two volume levels: low and high.
To set the low volume level:
1. Press the FCN key while the wireless telephone is on hook.
2. Select Volume Level from the menu.
3. Select a volume 1 (softest) through 8 (loudest) by pressing the appropriate
key. 5 is the default setting.
To adjust the volume level of a call, press the VOL key during the call. The volume
level adjusts from low to high. If you press the VOL key again, the volume level
toggles back from high to low.

Set the Ring Type for the Wireless Telephone

The wireless telephone has two ring settings: Normal Ring (an audible alert) and
Vibrator Ring.
To set the ring type:
1. Press the FCN key while the wireless telephone is on hook.
2. Select Telephone Ring from the menu.
4
Issue 2 February 2003