Procedure 7 - Power Supply - Tally T6090 Maintenace Manual

Procedure 7 – Power Supply
Removing
STEP 1. Remove any printed forms along with the Paper Stacking Tray, if they are present. Disconnect
Before beginning this procedure, turn the printer off and disconnect the power cable.
the Static Ground from the printer and remove the hood from the back of the printer.
Figure 4–11. Disconnecting the Static Ground and Removing the Sound Deadening Hood
Chapter 4: Removal and Reinstallation Procedures
Static
Ground
Wire
Sound Deadening Hood
Paper Rack
4 –13