Acoustics; Power Supply; Cooling System; Safety - Tally T6090 Maintenace Manual

T6090 Maintenance Manual

Acoustics

Power Supply

Cooling System

Safety

1–8
The noise generated by the T6090 printer varies according to its configuration as shown in the
table that follows:
Table 1–7. Acoustics
Printer
Configuration
Tabletop Unit
Printer with Pedestal
Quick Access Configuration
The printer requires single phase, 47 to 63 Hz. 90 to 264 VAC input power. The printer's
universal power supply automatically adjusts to the correct values. A fuse is provided to
interrupt power to the power supply. The following table gives typical current values.
Table 1–8. Power Requirements
External Power
Supply
AC Volts Frequency
(RMS) (Hz)
110 50
110 60
220 50
Cooling system malfunctions are detected and a failure will result in shuttle motion, paper
motion, and printing functions being inhibited. The malfunction will be reported on the
control panel display.
Personnel hazard areas have restricted access with appropriate warning labels. Catastrophic
equipment failures are inhibited with protective functions in major areas of overload potential.
Sound Power per
ISO 7779-C
7.4 bels
6.9 bels
7.9 bels
Current/Wattage Requirements
@ Nominal Voltage
Average Peak
Operating Operating
2.56 A/166 W 6.30 A/506 W
2.57 A/171 W 6.29 A/508 W
1.39 A/168 W 3.91 A/496 W
Sound Pressure Level
(9 position average)
57 dBA
52 dBA
62 dBA
Average Average
Idle (<5 min.) Idle (>5 min.)
0.88 A/41 W 0.64 A/25 W
0.85 A/42 W 0.62 A/25 W
0.41 A/42 W 0.31 A/26 W