Procedure 6 - The Fan Motor Assembly - Tally T6090 Maintenace Manual

T6090 Maintenance Manual
Procedure 6 –The Fan Assembly
Removing
STEP 1. Remove the Right End Cover (see Procedure 3).
STEP 2.
STEP 3.
STEP 4. Remove the three screws securing the Fan Assembly to the base of the printer. You can now
Reinstalling
4–12
Before beginning this procedure, turn the printer off and disconnect the power cable.
Remove the Engine Controller CBA (see Procedure 4).
Remove the Personality Module CBA and its Enclosure (see Procedure 5).
lift the fan out of the printer.
To reinstall the Fan Assembly, reverse the sequence of the above steps.
Figure 4–10. Removing Fan Assembly.