Table of Contents
Advertisement
T6090 Maintenance Manual
Procedure 1 – The Printer Lid
Removing
STEP 1. Raise the printer lid. Grasp the gas spring near where it connects to the printer cabinet. Insert
4–2
Before beginning this procedure, turn the printer off and disconnect the power cable.
a narrow screwdriver under the spring clip on the gas spring where it attaches to the printer.
Lift the clip straight up until it unlocks and the gas spring can be easily taken off its post.
Pivot Post
Spring Clip
The printer lid is heavy and will immediately try to come crashing down onto
whichever part of your anatomy is within reach when you remove the end of the
gas spring from its post. So be careful when you disconnect the gas spring!
Figure 4–1. Disconnecting the Gas Spring
Small Flat Blade Screwdriver
Advertisement
Table of Contents
Troubleshooting
