Procedure 2 - The Control Panel - Tally T6090 Maintenace Manual

T6090 Maintenance Manual
Procedure 2 – The Control Panel
Removing
STEP 1. Raise the printer lid.
STEP 2. Insert a small, flat screwdriver straight into the slot located to the left of the Control Panel.
STEP 3. Push the screwdriver straight in until the Control Panel's latch releases and the left edge of the
STEP 4. Lift Panel out gently, minimize any stress to the Control Panel cable.
4–4
Before beginning this procedure, turn the printer off and disconnect the power cable.
panel can be lifted up.
If you are installing a new Control Panel, reach inside and unplug the Control Panel cable from
the Engine Controller CBA (J801).
If you are removing the Right End Cover, carefully insert Control Panel back through its
opening and rest it in the inside of the printer.
Latch Release
Access Slot
Panel Latch
Figure 4–3. Removing the Control Panel