Figure 4–2. Removing The Lid - Tally T6090 Maintenace Manual

STEP 2. Grasp the printer lid by the front edge with one hand while you use a Phillips screwdriver to
remove the hinge-stop to the immediate left of the right hinge.
STEP 3. After you remove the hinge-stop, slide the lid assembly to the left to remove it from the
printer. If the lid does not slide off easily, loosen the hinge screws , then try to slide the lid off
again.
Reinstalling
To reinstall the printer lid, reverse the removal steps.
Chapter 4: Removal and Reinstallation Procedures
Step 2.
Remove
Hinge Stop
Hinges
Figure 4–2. Removing the Lid
4 –3