Hex Dumps; Printer Information Printouts And Displays; Help Menu; Printing A Help Menu - Tally T6090 Maintenace Manual

T6090 Maintenance Manual

Hex Dumps

Printer Information Printouts and Displays

HELP Menu

Printing a HELP Menu In Tech Access Mode
2–2
These dumps are located in the Configuration Menu, in the Printer Category, under the
Dmp Mod (Dump Mode) Parameter in normal menu operations. Hex Dumps can be used
to check printer functions and data processing operations and are also used to help solve
problems that can affect printer performance. There are three styles of Dump Modes on the
printer.
Style 1 Text, spaces, and control codes are printed out in hexadecimal format.
Make sure that wide paper (132 columns — 13+ inches of printable width) is loaded on
the printer before running a Style 1 Hex Dump.
Style 2 Control codes are printed out in hexadecimal format while text and spaces are
printed out in their original form.
Style 3 Control codes and spaces are printed out in hexadecimal format, while text is
printed out in its original form.
There are five printouts and displays that you can access through the printer control panel.
One is listed as one of the menus (HELP) and four others can be found in the Configuration
Menu, under the Printer Category.
The HELP Menu is a printout that lists selections that are available for each parameter in the
multilevel menus on the printer and indicates with an asterisk (*) which ones are currently
active.
Before printing out the HELP Menu, make sure that there is at least 13 inches of print-
able width on the installed paper.
STEP 1. Take the printer Offline.
STEP 2. Depress the LINE FEED Key and ENTER Key simultaneously until the printer
alarm sounds, then release them immediately to place the printer in Tech Access
Mode.
STEP 3. Depress the MODE Key to enter the multilevel menu system, then scroll ( Key) to
the HELP selection.
STEP 4. Depress the ENTER Key to begin printing the HELP Menu.
This printout will end when the entire HELP Menu is printed out.