Sht Spd (Shuttle Speed) Parameter (Menu Level 2); Shuttle Speed Selections (Menu Level 3); Rbn Spd (Ribbon Speed) Parameter (Menu Level 2); Speed Selections (Menu Level 3) - Tally T6090 Maintenace Manual

Sht Spd (Shuttle Speed) Parameter (Menu Level 2)

Provides a means to vary the Shuttle Motor speed for a Shuttle Motor Test.

Shuttle Speed selections (Menu Level 3)

23—48 Hz.

Rbn Spd (Ribbon Speed) Parameter (Menu Level 2)

Provides a means to vary the Ribbon Motor speed for a Ribbon Motor Test.

Speed selections (Menu Level 3)

1—250
Default

RibnThr (Ribbon Threshold) Parameter (Menu Level 2)

This parameter allows you to set the Ribbon Sensor Threshold value for the Ribbon Motion
Sensor .

Threshold selections (Menu Level 3)

1—255

POutThr (Paper Out Threshold) Parameter (Menu Level 2)

This parameter allows you to set the Paper Out Threshold value for the Paper Out Sensor to
compensate for reflectivity variances for different types of paper.
Threshold selections (Menu Level 3)
0—255

PMoThr (Paper Motion Threshold) Parameter (Menu Level 2)

This parameter allows you to set the Paper Motion Threshold value for the Paper Motion
Sensor to compensate for reflectivity variances for different types of paper.
Threshold selections (Menu Level 3)
0—255

Heavy (Heavy Forms) Parameter (Menu Level 2)

This Parameter allows you to slow the slew speed and increase the hammer fire for heavy
forms.

Heavy Forms selections (Menu Level 3)

OFF
ON
Chapter 2: Menu Operations
2–11