Vision Fitness classic User Manual page 14

TOUCH
TOUCH+
CONSOLE
J
D
T40,
TF40
Incline & T80
ONLY
F B
26
VF15_TM_Console_TRI_r1_8.indd 26-27
A
K
L
E
Start Stop
Incline Speed
Back Enter T40,
Energy Saver TF40
& T80 Speed
ONLY
I N M H C G
TOUCH+ CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before
use.
A) TOUCH DISPLAY: see next page for more information.
B) START: press to begin exercising, start your workout, or resume exercising after pause.
C) STOP: press to end your workout.
D) INCLINE KEYS: used to adjust incline in small increments (0.5% Increments).
E) SPEED KEYS: used to adjust speed in small increments (0.1 mph increments). Press and hold to
increase speed quickly (maximum increase of 1.0 MPH).
F) INCLINE TOGGLES (T40, TF40 & T80 ONLY): used to adjust incline in small increments (0.5% Increments).
G) SPEED TOGGLES (T40, TF40 & T80 ONLY): used to adjust speed in small increments (0.1 mph increments).
H) ENTER: press to confirm programming selections during workout setup.
I) BACK: press to go back to the previous step during program setup.
J) ACCESS POCKET: Contains iPod cable, USB for software updates or charging devices and headphone jack.
Use the iPod cable to connect, charge and control your iPod or iPhone. *
K) READING RACK: holds reading material.
L) MEDIA PLAYER HOLDER: holds your media player or tablet.
M) SAFETY KEY POSITION: enables treadmill when safety key is inserted.
N) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode. Press any key to wake up the
machine.
* Will not charge USB devices which require more than 1 amp.
TOUCH+
CONSOLE
27
4/22/15 10:00 AM