Fan Replacement - Regency L234-NG10 Owners & Installation Manual

maintenance
|
30

FAN REPLACEMENT

1) Unplug the power source.
2) Remove the faceplate.
3) Remove the safety screen.
4) Remove the glass door.
a) Pull the spring hook on the left that holds
the door in place. Place the hook into
the opening towards the outside of the
bracket. Repeat on right side
Spring Hook
Outside opening
30 |
Regency L234-10 Direct Vent Gas Insert
®
b) Swing the door out 45 degrees and lift up
and out.
.
5) Remove the logs.
6) Remove brick panels, if installed.
7) Remove the burner by undoing the 3 screws.
Burner Removed
8) Remove the burner tray by undoing the 4
screws.
Burner Tray Removed
9) Remove the rear log tray by undoing the 3
screws.
Rear Log Tray Removed