Program Presets; Scan Limits - American Dynamics SpeedDome Ultra 8 Quick Reference Manual

Select Preset to Program
4.
SELECT PRESET TO PROGRAM
7
PRESET
NUMBER
1
SEQUENCE SETUP MENU
CAMERA FUNCTIONS
FOCUS FAR to program preset
The number of presets available depends on your
operating environment.
•
If installed under SensorNet or RS-422, up to 96
presets are available.
•
If installed under Manchester, up to 64 presets are
available.
This screen provides links to lower level screens. See
the following screens:
•
Sequence Setup Menu (Screen 4.7a)
•
Program Presets (Screen 4.7b)
•
Camera Functions (Screen 3)
•
The 22X camera dome does not support the
Sequence Setup features.
Sequence Setup Menu
35X Camera Dome Only
4.
7a
SEQUENCE SETUP MENU
SEQUENCE NUMBER
STEP 1-4
STEP PRESET
1 0
2 0
3 0
4 0
Use this screen to create preset sequences.
SPEEDDOME ULTRA 8 CAMERA DOME CONFIGURATION UTILITY
QUICK REFERENCE GUIDE
PRESET NAME
PRESET 1
EXIT
1
DWELL TIME
MIN / SEC
0 0
0 0
0 0
0 0
EXIT

Program Presets

4.
7b
Position camera with PAN,
FOCUS FAR to save and exit
This screen also appears if a Preset is selected for the
Set Home Position (Screen 4.3) and the selected
preset has not been programmed.

Scan Limits

4.
8
Cancel RIGHT limit to Delete
Cancel RIGHT limit to Delete
Scan Limits are used to set right and left areas of
surveillance with compatible controllers. These scans
may be activated using the DirectSet Menu (Screen 10).
•
Use Pan/Tilt to adjust the dome's pointing direction.
•
Press Zoom to select the left and right scan limits.
•
Press Focus to cancel changes.
•
Press Focus when setting right scan limit to delete
the scan limits.
5 of 11
PRESETS
TILT, ZOOM and IRIS
EXIT
SCAN LIMITS
PAN to LEFT limit
ZOOM to mark BOUNDARY
CANCEL
SCAN LIMITS
PAN right to RIGHT limit
ZOOM to mark BOUNDARY
CANCEL
8200-0600-02, REV. B