Table of Contents
Advertisement
The page includes the following fields:
Object
Port
State
Rate (Kbps)
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Port
Ingress Rate Limit
(Kbps)
4.8.4.2 Egress Bandwidth Control
This page provides to select the egress bandwidth preamble. The Egress Bandwidth Control Setting and Status screens in
Figure 4-8-18
&
Figure 4-8-19
Description
Select port number for this drop down list.
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Figure 4-8-17 Ingress Bandwidth Control Status page screenshot
Description
The switch port number of the logical port.
Display the current ingress rate limit.
appear.
184
User's Manual of GSD-1002M
Advertisement
Table of Contents
