Face the LH. crankcase downward, and remove the RH.
crankcase from the LH. crankcase while tapping a few
places on the LH. crankcase with a plastic hammer.
NOTE
Be careful not to distort the mating surface of the
crank case during removal.
Remove the dowel pin and gasket.
CRANK SHAFT REMOVAL
Remove the crankshaft.
If the bearing is left on the crankshaft, use a bearing
puller to remove it.
TOOL : UNIVERSAL BEARING PULLER
TRANSMISSION/CRANK SHAFT/CRANK CASE
11-7