Crank Case Removal - DAELIM HISTORY 125 Service Manual

TRANSMISSION/CRANKSHAFT/CRANK CASE
● Install a new gasket and dowel pin.
● Tighten the transmission cover with the setting bolts.
● Install the following parts.
-Rear wheel (⇨13-3 )
-Rear swing arm (⇨13-8 )
-Rear brake caliper (⇨14-6 )
-EX. muffler (⇨ 4-12 )
-Continuously variable transmission (⇨SECTION 7 )
-RH. crank case cover (⇨7-2 )
● Install the rear cushion upper bolt.
● Install the transmission bleeder tube.
● Remove the oil check bolt, release the transmission oil
filler ACG cap or the LH. crankcase until the oil
overflow through oil hole and fill the recommended oil
slowly.
● Install the oil check bolt and the cap.
RECOMMENDED OIL : SAE 80W- 90
TRANSMISSION OIL AMOUNT : 0.15ℓ

CRANK CASE REMOVAL

● Remove the engine from the frame. (⇨6-2 )
● Remove the RH./LH. crankcase cover.(⇨8-4,7-2)
● Remove the transmission cover. (⇨13-3 )
● Remove the parts to disassemble crankcase.
● Loosen the 8 RH./LH. crankcase setting bolts.
11-6
TRANSMISSION COVER
SETTING
BOLTS
OIL CHECK BOLT
SETTING
BOLTS