Table of Contents
Advertisement
TRANSMISSION
DISASSEMBLY
Loosen the drain bolt, drain the mission oil.
Remove the LH. crankcase cover.
Driven pulley / drive face.
Remove the EX. muffler. ( 4-3 )
Remove the rear wheel. ( 13-3)
Loosen the transmission cover bolts.
Remove the transmission cover.
Remove the gasket and dowel pin.
Remove the drive shaft from the transmission cover by
using a hydraulic press.
NOTE
Take precautions not to damage the cover joints.
Remove the oil seal of the transmission cover.
TRANSMISSION/CRANK SHAFT/CRANK CASE
11-3
Advertisement
Table of Contents
Troubleshooting
