DAELIM Besbi SC125 Service Manual page 133

INSPECTION
Check components for damage or abnormal wear.
Replace defective parts with new ones.
Place the spring on a level place, and measure the free
length.
SERVICE LIMIT : 215mm
Set the fork pipe on a V-blocks, and measure fork pipe
deflection by rotating with a dial gauge.
SERVICE LIMIT : Replace if the deflection is greater
than 0.2mm
INSTALLATION
Install the spring, stopper loper to the damper comp.
TORQUE VALUE : 7.5 kgf m
NOTE
Install the spring with the smaller pitch side facing
upward.
FRONT WHEEL/FRONT FORK/STEERING
12-9