Engine Oil Level Inspection; Engine Oil Change; Oil Capacity - DAELIM Besbi SC125 Service Manual

ENGINE OIL LEVEL INSPECTION

Erect the motorcycle on the main stand.
Warm up the engine to heat the engine oil to an
appropriate level.
Stop the engine, and loosen the oil level gauge and
check the oil level line.

ENGINE OIL CHANGE

NOTE
To completely and rapidly drain engine oil, warm up
engine and erect the motorcycle on side stand.
Loosen the oil drain bolt and drain engine oil.
Operate the kick starter arm for several times to
remove the remaining oil from the engine.
Tighten the oil drain bolt.
TORQUE VALUE : 2.5 kgf m
CAUTION
It is extremely important to replace oil filter or clean
the oil filter screen at the first maintenance interval
(after 1,000Km).
Clean the oil filter screen every 4,000Km.
Clean the filter screen with fresh cleaning oil.
Check the hole cap O-ring for satisfactory condition
if necessary replace it with new one.
Tighten the hole cap with specified torque.
TORQUE VALUE : 1.5 kgf m
Fill the recommended engine oil to oil inlet.
OIL CAPACITY : 0.9 (After disassembly)
0.75 (After Oil change)
Tighten the oil level gauge.
API service classification : SL grade.
Start the engine and keep it idle for a few minutes.
Stop the engine and check the oil level. If the oil level
is low, add the recommended engine oil.
Check on oil leaks.
LUBRICATION
2-3