Table of Contents
Advertisement
A.C GENERATOR / STARTER CLUTCH
STARTER CLUTCH INSTALLATION
Install the starter oneway clutch set, starter driven gear
and needle bearing to the starter clutch assembly.
Install the starter clutch to the RH. crankshaft.
NOTE
When installing the starter clutch, match it with the
groove accurately
Install the thrust washer.
Temporarily install the starter clutch lock nut.
Hold the drive face with the drive face holder.
Tighten the starter clutch lock nut with a special socket.
NOTE
Tighten the lock nut with specified torque.
TORQUE VALUE : 5.5 kgf m
TOOLS : SPECIAL SOCKET (12.7x28x120)
DRIVE FACE HOLDER
Install the following parts.
RH. crankcase cover
A.C Generator
Cooling fan
Cooling fan cover
EX. muffler ( 4-3 )
8-8
Advertisement
Table of Contents
Troubleshooting
