Clutch / Driven Pulley Inspection; Driven Face Bearing Inspection; Movable Driven Face Spring Inspection; Clutch Outer - DAELIM Besbi SC125 Service Manual

LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION

CLUTCH / DRIVEN PULLEY INSPECTION

Driven Face Bearing Inspection

Check the inner bearing oil seal (if installed) for
damage; replace as necessary.
Check the needle bearing for damage or excessive play
and replace as necessary.
Turn the inner race of the outer bearing with your
finger. Check that the bearing turns smoothly and
quietly, and that the bearing outer race fits securely.
Replace the bearing if necessary.

Movable Driven Face Spring Inspection

Measure the free length of the driven pulley spring and
replace if the service limit is exceeded.
SERVICE LIMIT : 163.7mm
TOOL : VERNIER CALIPER

Clutch Outer

Measure the I.D. at shoe contact surface of the clutch
outer. Replace the outer if the service limit is exceeded.
SERVICE LIMIT : 125.5mm
Clutch Shoe Inspection
Measure the thickness of each shoe ; replace if the
service limit is exceeded.
SERVICE LIMIT : 1.5mm
7-13