TRANSMISSION OIL
INSPECTION
Check the body and the connection of each engine
component for any leak.
Remove the oil check bolt and check to see if the oil
overflows from the oil check hole.
If only the small amount of oil overflows. fill the
recommended transmission oil through the oil filler
hole gradually.
OIL CAPACITY : 0.11
0.09
NOTE
Oil level inspection must be performed in the flat
ground with the vehicle being straight by raising the
main stand.
RECOMMENDED OIL : SAE 80W/90
Tighten the oil check bolt.
TORQUE VALUE : 0.9 kgf m
Start the engine and check for leak.
(FULL)
(CHANGE)
LUBRICATION
2-7