Yamaha 25BMH Service Manual page 118

CHK
CONTROL SYSTEM
ADJ
(6) If they are not in contact, loosen the set
6
bolt , adjust until they are correctly in
contact with each other, and secure the
bolt again.
3. Adjusting the carburetor control link:
• Accelerator cam
• Carburetor control link
Adjustment steps
(1) Set the shift lever
tion.
(2) Move the throttle
tion.
(3) Make sure that the magnet base stop-
3
per is in contact with the stopper on
the engine body (full-open end stop-
4
per) .
3-7
E
1
in forward posi-
2
to full-open posi-