Initial Settings; Turning The Camera On; Setting The Display Language - Ricoh PENTAX K-3 II Operating Manual

4
Rotate the memory card
cover as shown by 3, and
slide it in the direction of 4.
u Caution
• Do not remove the memory card while the card access lamp
is lit.
• If the memory card cover is opened while the power is on,
the camera turns off. Do not open the cover while the camera
is in use.
• Use this camera to format (initialize) a memory card that
is unused or has been previously used on other devices.
(p.35)
• Use a high-speed memory card when recording movies. If the
write speed cannot keep up with the recording speed, writing
may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to "Memory Card Settings" (p.39).
• When using an Eye-Fi card or a Flucard, refer to "Using a
Wireless Memory Card" (p.86).
4
Turn the camera on and make the initial settings.

Turning the Camera On

3
1
Turn the main switch to [ON].
The first time the camera
is turned on after purchase,
the [Language/W] screen
appears.
t Memo
• The power automatically turns off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D3 menu.

Setting the Display Language

1
Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need
to be changed.
2
Press B to move the frame to F and press D.
The [F Hometown] screen appears.
3
Use CD to select a city.
Use R to change the region.
Refer to "List of World Time
Cities" (p.100) for cities that can
be selected as a hometown.

Initial Settings

2
Initial Setting Initial Setting
English English
New York New York
Text Size Text Size Standard Standard
Settings complete Settings complete
Cancel Cancel
Hometown Hometown
New York New York
DST DST
Cancel Cancel OK OK
33