Ricoh PENTAX K-3 II Operating Manual page 23

Menu Item
*2
High-ISO NR
Slow Shutter Speed NR
Program Line
A2
GPS Logging
ASTROTRACER
GPS
Calibration
Additional Settings
Contrast AF
Focus Peaking
Grid Display
Live View
Histogram Display
Highlight Alert
Composition Adjust.
A3
Viewfinder
Electronic
Level
Live View
Horizon Correction
*2
AA Filter Simulator
*2
Shake Reduction
Input Focal Length
Sets the Noise Reduction setting when shooting with
a high ISO sensitivity.
Sets the Noise Reduction setting when shooting with
*2
a slow shutter speed.
Selects the Program Line setting.
Sets the logging interval and duration.
Sets whether to track and capture celestial bodies.
Performs a calibration.
Sets whether to enable the GPS time synchronization
and GPS indicator lamp.
*2
Sets the autofocus mode for shooting with Live View.
Emphasizes the outline of the subject in focus and makes
*2
it easier to check the focus.
Displays the grid during Live View.
Displays the histogram during Live View.
Sets overexposed areas to blink red during Live View.
Allows you to adjust the composition of your image using
the Shake Reduction mechanism.
Displays the electronic level in the EV bar scale in the
viewfinder and/or LCD panel.
Displays the electronic level during Live View.
Corrects horizontal tilt when in A mode.
Applies a low-pass filter effect using the Shake Reduction
mechanism.
Activates the Shake Reduction function.
Sets the focal length when using a lens of which focal
length information cannot be obtained.
Function Default Setting Page
Auto p.44
Auto p.41
Normal p.41
15sec./1hr./
p.65
SD1
Off p.66
– p.64
On/On p.64
Face Detection p.48
Off p.48
Off
Off p.11
Off
Off p.62
Off p.17
On p.11
Off –
Off p.62
On –
p.91
35mm
21
1