Processing Images With Digital Filters - Ricoh PENTAX K-3 II Operating Manual

Processing Images with Digital Filters

1
Display the image to edit in single image display.
2
Select T in the playback mode palette.
The screen to select a filter appears.
3
Select a filter.
Use Q to select a different
image.
4
Base Parameter Adj
Extract Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
Tone Expansion
Proceed to Step 7 if you do not need to change the
parameters.
4
Press G.
The parameter setting screen appears.
5
Set the parameters.
74
100-0001 100-0001
Base Parameter Adj Base Parameter Adj
Parameter Adj. Parameter Adj.
Stop Stop OK OK
Sketch
Water Color
Pastel
Posterization
Miniature
Soft
Starburst
Fish-eye
Slim
Brightness Brightness
Cancel Cancel OK OK
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
6
Press E.
The screen of Step 3 reappears.
7
Press E.
The save confirmation screen appears.
8
Select [Apply additional filter(s)], [Save to SD1],
or [Save to SD2], and press E.
Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of
Step 3 reappears.
u Caution
• Only JPEG and RAW images captured with this camera can
be edited with the digital filters.
• RAW images captured using HDR Capture or Pixel Shift
Resolution cannot be processed with Digital Filter.
t Memo
• Up to 20 filters, including the digital filter used during shooting
(p.59), can be applied to the same image.
Recreating Filter Effects
Retrieves the filter effects of the selected image and applies the
same filter effects to other images.
1
Display a filter-processed image in single image
display.
2
Select T in the playback mode palette.