Ricoh PENTAX K-3 II Operating Manual page 49

t Memo
• The following settings for autofocus operation can be set
in the E3 menu.
15. AF.S Setting
16. 1st Frame Action in AF.C
17. Action in AF.C Continuous
18. Hold AF Status
In [18. Hold AF Status], you can set whether to immediately
reactivate autofocus or to maintain the focus for a certain
amount of time before reactivating autofocus when the
subject happens to move out of the selected focusing area
after being focused. The default setting is to immediately
reactivate autofocus when the subject moves out of focus.
• In T mode, the autofocus mode is fixed to z.
Selecting the Focusing Area (AF Point)
1
Turn R while pressing b.
Out of the 27 AF points, the camera
Auto (27 AF
J automatically selects the optimum
Points)
focusing area.
Out of the selected 9 AF points, the
I Zone Select
camera automatically selects the
optimum focusing point.
Sets the focusing area to the user
E Select
selected point from 27 points.
Sets the focusing area to the user
selected point from 27 points. When
the subject happens to move out of the
Expanded
F
selected focusing area after being
Area AF (S)
focused, 8 peripheral points are used
as back-up points.
Not available in x mode.
Focus-priority, Release-
priority
Release-priority, Auto,
Focus-priority
Focus-priority, Auto, FPS-
priority
Off, Low, Medium, High
v
Sets the focusing area to the user
selected point from 27 points. When
the subject happens to move out of the
Expanded
G
selected focusing area after being
Area AF (M)
focused, 24 peripheral points are used
as back-up points.
Not available in x mode.
Sets the focusing area to the user
selected point from 27 points. When
the subject happens to move out of the
Expanded
H
selected focusing area after being
Area AF (L)
focused, 26 peripheral points are used
as back-up points.
Not available in x mode.
Sets the focusing area to the center
D Spot
of the 27 points.
Proceed to Step 2 when a mode other than J or D
is selected.
2
Select the desired AF point.
Available operations
Changes the AF point.
ABCD
Returns the AF point to the center.
E
c Switches the function of the arrow keys
(ABCD) to the Change AF Point
mode or the direct key operation.
3
2 5 0 2 5 0
1/ 1/
5.6 5.6 8 0 0 8 0 0
F F
12345 12345
12345 12345
47