Configuring The Capture Settings; Taking Pictures; Memory Card Settings; Image Capture Settings - Ricoh PENTAX K-3 II Operating Manual

Configuring the Capture Settings

Memory Card Settings

Set the recording method for when two memory cards are
inserted in [Memory Card Options] of the A1 menu or the
control panel.
When the memory card in the SD1 slot
Sequential
W
becomes full, data is saved to the card in
Use
the SD2 slot.
Save to Saves the same data to the memory cards
Y
Both in both the SD1 and the SD2 slots.
Saves the RAW data to the memory card in
Separate
Z
the SD1 slot, and the JPEG data to the
RAW/JPEG
card in the SD2 slot.
t Memo
• When in C mode, data is saved to the card in either the SD1
or the SD2 slot. Set in [Memory Card Options] of the
C1 menu.

Image Capture Settings

Set the file format for still pictures in [Image Capture Settings]
of the A1 menu or the control panel.
File Format JPEG, RAW, RAW+
JPEG Recorded Pixels
q, p, o, r
JPEG Quality
m, l, k
RAW File Format PEF, DNG
u Caution
• When [Memory Card Options] is set to [Separate RAW/
JPEG], [File Format] is fixed to [RAW+].
t Memo
• When [File Format] is set to [RAW+], a JPEG image and
a RAW image with the same file number are saved at the
same time.
A1/v
• You can take pictures with a different file format setting only
when P is pressed. (p.80)
• [PEF] of [RAW File Format] is a PENTAX original RAW file
format.

Movie Capture Settings

Set the file format for movies in [Movie Capture Settings]
of the C1 menu or the control panel.
Recorded Pixels
u
t
A1/v
Framerate
60i, 50i, 30p, 25p, 24p
60p, 50p, 30p, 25p, 24p
3
C1/v
39