Ricoh PENTAX K-3 II Operating Manual page 97

Error Messages
Not enough battery power
remaining to activate Pixel
Mapping These messages appear when you try
to perform Pixel Mapping or Sensor
Not enough battery power
Cleaning, or to update the firmware if the
remaining to clean sensor
battery level is insufficient. Install a fully
Not enough battery power charged battery.
remaining to update the
firmware
Unable to update firmware. Unable to update the firmware.
There is a problem with the The update file is damaged.
firmware update file Try downloading the update file again.
The maximum folder number (999)
Image folder cannot is being used, and no more images can
be created be saved. Insert a new memory card
or format the card.
The image could not be saved because
Unable to store image
of a memory card error.
The operation could not be The operation failed. Try the operation
completed correctly again.
You are trying to select more than the
maximum number of images for the
following functions.
• Select & Delete
No more images
• Image Copy
can be selected
• Index
• RAW Development
• Protect
• Eye-Fi Image Transfer
There are no images that can
No image can be processed be processed using the Digital Filter
or RAW Development function.
Appears when you try to perform Resize,
Cropping, Digital Filter, Movie Edit, RAW
This image cannot Development, or Save as Manual WB for
be processed images captured with other cameras,
or when you try to perform Resize
or Cropping for minimum file size images.
The camera failed
Failed to create an index print image.
to create an image
Description Error Messages
You are trying to set a function that
This function is not available
is not available for the exposure mode
in the current mode
that is set.
The camera will turn off because its
The camera will turn off internal temperature is too high.
to prevent damage from Leave the camera turned off until it has
overheating had time to cool down before turning
on the camera again.
Images cannot be transferred when
Set the Eye-Fi [Action Mode] is not set to [SELECT]
communication to "SELECT" in [Wireless Memory Card] of the
D3 menu. (p.86)
There are no images that can be
Image not found
transferred when an Eye-Fi card is used.
This folder cannot be selected because
Cannot be selected the number of files exceeds the maximum
number allowed.
Shutter release is disabled.
Pictures cannot be taken when
Ensure the zooming index
a retractable lens is attached and
on the lens is set to a position
is no extended. (p.37)
that permits shutter release
Description
6
95