Displaying The Local Date And Time Of The Specified City - Ricoh PENTAX K-3 II Operating Manual

Available operations
Moves the text selection cursor.
ABCD
Moves the text input cursor.
R
Switches between upper and lower case
J
letters.
Enters a character selected with the text
E
selection cursor at the position of the text
input cursor.
Deletes a character at the position of the
L
text input cursor.
4
After entering the text, move the text selection
cursor to [Finish], and press E.
5
The [Rename USER Mode] screen reappears.
Using the Saved USER Mode
1
Set the mode dial to O, P, or Q.
The USER mode guide is
displayed for about 30 seconds.
Use AB to check the saved
settings.
2
Change the settings as necessary.
The exposure mode can be
changed in [Exposure Mode]
of the A1 menu.
t Memo
• The settings changed in Step 2 are not saved as the USER
mode settings. When the camera is turned off, the camera
returns to the originally saved settings. To change the original
settings, save the USER mode settings again.
82
The date and time set at the time of initial setting ("Initial
Settings" (p.33)) serve as the date and time of your present
location and are reflected in the shooting date and time
for images.
Setting the destination to a location other than your present
location enables you to display the local date and time
on the monitor when traveling abroad and also save images
time-stamped with the local date and time.
1
2
3
ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR
4
1 2 3 4
Exposure Mode Exposure Mode
Memory Card Options Memory Card Options
Image Capture Settings Image Capture Settings
AF Assist Light AF Assist Light
5
Digital Filter Digital Filter
HDR Capture HDR Capture
Pixel Shift Resolution Pixel Shift Resolution
Cancel Cancel OK OK
6
7
Displaying the Local Date and Time
of the Specified City
Select [World Time] in D1 menu.
The [World Time] screen appears.
Select the time you wish to
display in [Time Setting].
F (Hometown) or G
(Destination) can be selected.
Select [G Destination] and press D.
The [G Destination] screen appears.
Use CD to select a city.
Use R to change the region.
Select [DST] (daylight saving time), and use CD
to select S or T.
Press E.
The screen of Step 2 reappears.
Press F twice.
D1
World Time World Time
Time Setting Time Setting
Destination Destination
London London 16:00 16:00
Hometown Hometown
New York New York
10:00 10:00
Destination Destination
London London
+6:00 +6:00
DST DST
16:00 16:00
Cancel Cancel OK OK