Using The Battery And Charger; Charging The Battery - Ricoh PENTAX K-3 II Operating Manual

Slr digital camera
Hide thumbs Also See for PENTAX K-3 II:
Table of Contents

Advertisement

u Caution
• When attaching or removing the lens, choose an environment
that is relatively free of dirt and dust.
• Keep the body mount cover attached on the camera when
a lens is not attached.
• Be sure to attach the lens mount cover and lens cap to the
2
lens after removing it from the camera.
• Do not insert your fingers inside the lens mount of the camera
or touch the mirror.
• The camera body and lens mount incorporate lens
information contacts. Dirt, dust, or corrosion may damage the
electrical system. Please contact your nearest service center
for professional cleaning.
• When a retractable lens is attached and is not extended,
you cannot take pictures or use some functions. If the lens
is retracted during shooting, the camera stops working.
Refer to "How to Use a Retractable Lens" (p.37) for details.
• We assume no responsibility nor liability for accidents,
damages and malfunctions resulting from the use of lenses
made by other manufacturers.
t Memo
• Refer to "Functions Available with Various Lenses" (p.89) for
details on the functions of each lens.
30

Using the Battery and Charger

Use the battery D-LI90 and battery charger D-BC90 exclusively
developed for this camera.
Note (for USA only): AC plug cord
UL Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7 A, minimum 6 ft. (1.8 m)

Charging the Battery

1
Connect the AC plug cord to the battery charger.
Lithium-ion
battery
3
1
2
Plug the AC plug cord into the power outlet.
3
Face the A mark on the battery up, and insert it into
the battery charger.
The indicator lamp is lit while charging and turns off when
the battery is fully charged.
u Caution
• Do not use the battery charger D-BC90 to charge batteries
other than the battery D-LI90. Charging other batteries may
cause damage or heating.
• Replace the battery with a new one in the following cases:
• If the indicator lamp blinks or does not light after the battery
is inserted correctly
• If the battery starts to run down more quickly even after
being charged (the battery may have reached the end of its
service life)
Indicator lamp
2
AC plug cord
Battery charger

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pentax k-3 ii

Table of Contents