Ricoh PENTAX K-3 II Operating Manual page 89

Eye-Fi card
Transfers automatically when images are
taken, new images are saved, or images are
AUTO overwritten.
For movies, only files of 2 GB or less can
be transferred.
Transfers images or folders that are selected in
SELECT [Eye-Fi Image Transfer] of the playback mode.
Only JPEG and RAW images can be transferred.
OFF Stops the communication function.
Flucard
ON Enables wireless data transfer with Flucard.
OFF Disables wireless data transfer with Flucard.
3
Specify [Auto Resize].
When set to T, JPEG images are saved to the Eye-Fi card
or Flucard with the size of r.
4
Press F twice.
u Caution
• Insert an Eye-Fi card or a Flucard in the SD2 slot.
If it is inserted in the SD1 slot, the wireless LAN function
cannot be used. When an Eye-Fi card or a Flucard
is not inserted in the SD2 slot, the [Wireless Memory Card]
settings cannot be set.
• Set up a wireless LAN access point on a computer for the
card connection.
• For RAW images and movie files, the success of transfer
depends on the specifications and settings of the Eye-Fi card
in use. GPS log files cannot be transferred.
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images.
The camera may turn off if the internal temperature of the
camera becomes high.
• For precautions on the Eye-Fi card, refer to "About Eye-Fi
Cards" (p.108).
t Memo
• A smartphone can be used to operate the camera when
a Flucard compatible with this camera is used. Refer to the
Flucard manual for details on how to use the card.
• When an Eye-Fi card is used, 100 images can be stored
in a single folder. For RAW+ images, two files are counted
as one image.
• In Step 2, select [Communication Info] to check the wireless
LAN information, and [Firmware Info/Options] to check the
firmware version of the card.
• When [Reset Transfer Settings] is selected in Step 2,
the [Action Mode] setting is returned to the default value.
5
87