Setting The Copyright Information; Using A Wireless Memory Card - Ricoh PENTAX K-3 II Operating Manual

File No.
Each file name consists of a string
of 4 characters and a sequential
number from 0001 to 9999.
You can set whether to continue the
sequential numbering for the file
name even if a new folder is created
in [Sequential Numbering] of [File
No.] in the D2 menu.
Continues the sequential numbering for the file name
T
even if a new folder is created.
5
Returns the file number of the first image saved
S
to a folder to 0001 each time a new folder is created.
Select [Reset File Number] to reset the file number to its default
value.
t Memo
• When the file number reaches 9999, a new folder is created
and the file number is reset.

Setting the Copyright Information

Sets the photographer and copyright information embedded
in the Exif data.
1
Select [Copyright Information] in D2 menu and
press D.
The [Copyright Information] screen appears.
2
Use CD to set [Embed
Copyright Data].
86
File No. File No.
Sequential Numbering Sequential Numbering
Reset File Number Reset File Number
3
Uses sequential file number Uses sequential file number
in new folder based on last in new folder based on last
number in previous folder number in previous folder
4
5
t Memo
• The Exif information can be checked using the provided
D2
A memory card with a built-in wireless LAN (Wi-Fi) "Eye-Fi card"
or a "Flucard" compatible with this camera can be used.
By using these cards, images can be transferred from
the camera to a computer or other device via wireless LAN.
You can set the camera action for when an Eye-Fi card
or a Flucard is used.
1
Copyright Information Copyright Information
Embed Copyright Data Embed Copyright Data
2
Photographer Photographer
Copyright Holder Copyright Holder
Does not embed copyright information in the Exif
S
data.
T Embeds copyright information in the Exif data.
Select [Photographer] or [Copyright Holder], and
press D.
The text-entry screen appears.
Change the text.
Up to 32 single-byte alphanumeric characters and symbols
can be entered.
Refer to Steps 3 and 4 of "Editing a Setting Name" (p.81) for
how to enter text.
Press F twice.
software "Digital Camera Utility 5".

Using a Wireless Memory Card

Select [Wireless Memory Card] in D3 menu and
press D.
The [Wireless Memory Card] screen appears.
Select [Action Mode].
Items that can be set are
displayed according to the type
of card inserted.
D3
Wireless Memory Card Wireless Memory Card
Action Mode Action Mode
Auto Resize Auto Resize
Communication Info Communication Info
Firmware Info/Options Firmware Info/Options
Automatically transfers Automatically transfers
unsent images from memory card unsent images from memory card
Cancel Cancel OK OK