Ricoh PENTAX K-3 II Operating Manual page 28

Menu Item
Flicker Reduction
1
Auto Power Off
Select Battery
D3
Wireless Memory Card
Reset
Pixel Mapping
Dust Alert
Dust Removal
D4
Sensor Cleaning
Format
Firmware Info/Options
26
Function
Cuts down on monitor flicker by setting the power frequency.
Sets the time until the camera turns off automatically
if no operations are made for a certain period of time.
Sets the camera action for when the optional battery grip
is attached to the camera.
Sets the camera action for when an Eye-Fi card or a Flucard
is used.
Resets the settings of the direct keys and for the items of the A
menu, C menu, B menu, D menu, control panel, and playback
mode palette.
Maps out and corrects any defective pixels on the sensor.
Detects dust adhering to the sensor and visually displays the
location of the dust on the monitor.
Cleans the sensor by applying high-frequency (ultrasonic)
vibrations.
Locks the mirror in the up position for cleaning the sensor with
a blower.
Formats a memory card.
Displays the camera's firmware version. You can check the
current firmware version before running an update.
Default Setting Page
–
50Hz
1min. p.33
Auto Select/
p.31
Auto-detect
– p.86
– –
– p.93
– p.93
– p.93
– p.94
– p.35
– –