Using The Gps - Ricoh PENTAX K-3 II Operating Manual

6
Press E.
The camera returns to standby mode in Live View.
u Caution
• This function cannot be used in the following situations.
• When the drive mode is set to [Interval Shooting], [Interval
Composite], or [Interval Movie Record]
• When using the ASTROTRACER function
t Memo
• The adjusted composition is saved even if Live View is ended
or the camera is turned off. To reset the saved adjustment
value when Live View is ended, set [Composition Adjust.] to
S (Off) in [Memory] of the A4 menu. (p.83)

Using the GPS

The following functions are available with the camera's built-in
GPS unit.
Saves the GPS positioning data received
GPS Logging
periodically to the memory card. (p.65)
Tracks and captures celestial bodies.
(p.66)
By matching the movement of the built-in
Shake Reduction unit with the movement
ASTROTRACER
of celestial bodies, celestial bodies can
be captured as individual points even
when shooting with a long exposure
setting.
Automatically adjusts the camera's date
GPS Time Sync and time settings using information
obtained from GPS satellites. (p.64)
Press 4 to turn the GPS on.
A beep sounds and the GPS indicator
lamp lights up. Press 4 again
to turn the GPS off.
You can check the GPS positioning status on the status screen
and Live View screen.
Green 3D positioning
Yellow 2D positioning
Red No positioning
3
GPS positioning status
2 5 0 2 5 0
1/ 1/
5.6 5.6 1 6 0 0 1 6 0 0
F F
12345 12345
12345 12345
63