Mantel Leg And Wall Projections - Heatilator ION-V7 Installation Manual

C. Mantel Leg and Wall Projections
The mantel leg and wall projection dimensions are de-
termined by the decorative front that is to be installed.
Note the figure titles in regards to whether the mantel/wall
projection is made from combustible or non-combustible
material.
Combustible Mantel Legs or Wall Projections
MOUNTED FLUSH WITH WALL
1/4 IN.
TOP OF
APPLIANCE
OUTER WRAP
Figure 10.5 Combustible Mantel Leg or Wall Projections
(Acceptable on both sides of outer wrap)
Non-Combustible Mantel Legs or Wall Projections
MOUNTED FLUSH WITH WALL
TOP OF APPLIANCE
OUTER WRAP
6 IN.
MIN.
PERPENDICULAR WALL
Figure 10.6 Non-Combustible Mantel Leg or Wall Projections
(Acceptable on both sides of outer wrap)
DRYWALL
4 IN.
UNLIMITED
12 IN.
(305 MM)
MIN.
MANTEL LEG OR
PERPENDICULAR WALL
DRYWALL
4 IN.
UNLIMITED
MANTEL LEG OR
Heatilator • ION-V7, ION-S7, ION-H7 Installation Manual • 2276-980 Rev. E • 5/15
49