Yamaha XT1200Z 2010 Service Manual page 518

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Fault code No.
Item
6 Defective rear wheel sensor. Improperly installed sensor
7 Malfunction in ECU.
8 Malfunction in ABS ECU.
Fault code No.
Item
Fail-safe system
Diagnostic code No.
Meter display
Procedure
Probable cause of mal-
Item
function and check
email: info@motomatrix.co.uk
69
Front wheel sensor: no normal signals are received from the
rear wheel sensor.
→ Reinstall or repair the sen-
sor.
Check whether the front
wheel sensor is defective. →
Execute the diagnostic
mode. (Code No. d:16)
Front wheel stopped: Check
that the cumulative pulse val-
ue does not increase.
Front wheel is rotated sever-
al turns by hand: Check that
the cumulative pulse value
increases.
Replace the rear wheel sen-
sor.
Replace the ECU.
Replace the ABS ECU.
Er-1
ECU internal malfunction (output signal error): no signals are
received from the ECU.
Able/Unable to start engine
Able/Unable to drive vehicle
—
—
—
Maintenance job
8-69
FUEL INJECTION SYSTEM
Execute the diagnostic
mode. (Code No. d:16)
Rotate the front wheel by
hand and check that the indi-
cated value increases.
Value increases → Start the
engine, and input the vehicle
speed signals by operating
the vehicle at 20 to 30 km/h.
The fault code can also be
deleted by activating the di-
agnostic mode and selecting
diagnostic code number "d:
63"
Value does not increase →
Go to item 7.
Execute the diagnostic
mode. (Code No. d:16)
Rotate the front wheel by
hand and check that the indi-
cated value increases.
Value increases → Start the
engine, and input the vehicle
speed signals by operating
the vehicle at 20 to 30 km/h.
The fault code can also be
deleted by activating the di-
agnostic mode and selecting
diagnostic code number "d:
63"
Value does not increase →
Go to item 8.
Execute the diagnostic
mode. (Code No. d:63)
Confirmation of service
completion