Yamaha XT1200Z 2010 Service Manual page 105

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
1. Meter assembly lead
2. Front left turn signal light lead
3. Auxiliary DC jack
4. Front right turn signal light lead
5. Auxiliary DC jack lead
6. Headlight sub-wire harness
7. Meter assembly
8. Left auxiliary light
9. Right auxiliary light
A. Route the meter lead through the hole in the
windshield bracket.
B. Position the plastic locking tie at the location
shown in the illustration.
C. Point the end of the plastic locking tie forward.
D. Route the headlight sub-wire harness, auxiliary
DC jack lead, front left turn signal light lead, front
right turn signal light lead, and meter assembly
lead though the hole in the headlight assembly
bracket.
E. Route the meter assembly lead to the rear of the
headlight sub-wire harness. Make sure that the
meter assembly lead crosses the headlight sub-
wire harness between the holder and the right
auxiliary light.
F. Fit the headlight sub-wire harness in between the
cap and the headlight assembly, making sure to
push the headlight sub-wire harness all the way in.
G. Point the open ends of the holder forward.
email: info@motomatrix.co.uk
2-44
CABLE ROUTING