Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
1. Fuel tank overflow hose and fuel tank breather
hose
2. Fuel tank
3. Fuel hose
4. Fuel pump
5. Air filter case
6. Cylinder head breather hose
A. Align the hose clamps with the white paint marks
on the fuel tank overflow hose and fuel tank
breather hose. Do not install the hose clamps on
the flange at the end of each hose fitting on the fuel
tank.
B. Install the fuel tank overflow hose and fuel tank
breather hose with their white paint marks facing
forward. Install each hose onto the hose fitting of
the fuel tank up to the wide portion at the base of
the fitting.
C. Install the cylinder head breather hose with its
yellow paint mark facing to the left.
D. Point the ends of the hose clamp to the left.
E. Make sure that the gap between the end of the
cylinder head breather hose and the cylinder head
cover is 1 mm (0.04 in) or less.
F. Point the ends of the hose clamp forward.
G. Install the cylinder head breather hose with its
white paint mark facing to the left.
email: info@motomatrix.co.uk
2-52
CABLE ROUTING