Table of Contents
Advertisement
<Auto Shutdown Time>
Set a timer to automatically shut down the machine after the specified period of idle time has elapsed since the
machine entered the sleep mode. This setting is available when a telephone line cable is not connected to the machine
or when the machine is not communicating with the computer via USB cable or LAN Cable.
<Set This Function>
<Off>
<On>
<Set Time>
1 to 4
to 8 (hr.)
<Menu>
set the Auto Shutdown time
Before setting <Auto Shutdown Time>
●
When the <Auto Shutdown Time> setting is enabled, the machine may automatically shut down even if you
are operating the machine from the Remote UI. A malfunction may occur, particularly if the machine shuts
down while data is being imported. When you import data using the Remote UI, set <Auto Shutdown Time>
to <Off> in advance.
●
If any setting of the [Timer Settings] is changed from the Remote UI while the machine is in the sleep mode,
the timer for the <Auto Shutdown Time> setting is reset to the beginning. The machine automatically shuts
down after the specified period of idle time has elapsed since the timer was reset.
●
Specifying an auto shutdown time shorter than the default setting (4 hours) may shorten the life of the
toner.
<Auto Sleep Time>
If the machine has not been operated or has had no data to process for a specified period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power.
Entering Sleep Mode(P. 177)
1
to 60 (min.)
<Auto Sleep Daily Timer>
You can specify the time when the machine is automatically set to the sleep mode.
<Set This Function>
Setting Menu List
<Preferences>
<Timer/Energy Settings>
<Apply>
<Auto Shutdown Time>
459
Select <On>, and
Entering Sleep Mode(P. 177)
Advertisement
Table of Contents
