Event List Editor; Continuous Controller Edit; Continuous Controller Screen; Pitch Strip Edit - E-Mu XL-7 Command Station Owner's Manual

Event List Editor

100 E-MU Systems
Continuous controller, pitch wheel. mono pressure, poly pressure and
program change MIDI messages can be edited, inserted or deleted using this
menu. Place the cursor underneath the "Event Scroll Field" shown
below and turn the data entry control to navigate through events.
The event list editor also allows you access to the Conductor Track which sets
the tempo and meter for the pattern.
Hold the Enter button and turn the data entry control to scroll through
events when the cursor is on any other field.
• Erase button - - - - - Erases the currently selected event.
• Repeat button - - - - Duplicates the currently selected event, allowing
• Note: You cannot have two events with the exact same time and data in
a pattern. XL-7 will delete any duplicate events as soon as you increment
the event or exit the screen.

Continuous Controller Edit

Continuous controller numbers 1-95 can be edited. Continuous controllers
and Channel Pressure messages may range in value from 0-127.

Continuous Controller Screen

Track Number
T
01 EVENT
C01 controller #1
MIDI
Channel

Pitch Strip Edit

PitchStrip messages are bidirectional and may range in value from -8192 to
+8191.

Pitch Strip Screen

T
01 EVENT
C01 pitch strip:
you to edit and create a new event.
1) Press Repeat.
2) Change the time, channel, or MIDI event type.
Event Scroll Field
(scroll though events)
<-> 002.03.008
Event Controller
Type No. Field
<-> 002.03.004
Bidirectional Pitch Value
Sequencer
Pattern Edit Menu
Time Location
v:52
Event
Value
-49