Transposing The Instrument - E-Mu XL-7 Command Station Owner's Manual

Transposing the
Instrument
212 E-MU Systems
L1
PATCHCORD
XfdRand -> RTXfade
That's it! Now set each Layer up the way you want. Try radically
8.
different instruments, filter settings, or tunings. Or you can make each
layer just slightly different for a more natural effect. Try adjusting the
Fades or overlapping the ranges if you want more than one layer to play
at once.
The Transpose parameter lets you transpose the key of the current layer's
Instrument. Transpose works by shifting the keyboard position in semitone
intervals relative to middle C. Use this parameter to transpose different
layers apart by semitone intervals. For example, by transposing one layer by
+7 semitones, it will track other layers at a perfect fifth interval.
C-2 C-1 C0 C1
The transposition range varies for each instrument. The software limiters
have been removed in order to provide extreme transpositions. The upper
and lower transposition range is now limited by the original pitch, the
sample rate of the instrument's sample and the G-chip interpolation
hardware.
L1
TRANSPOSE
+36 semitones
C2 C3 C4 C5
Preset Edit Menu

Transposing the Instrument

#01
+100
C6 C7 C8 G8