First Note Record; Pattern Length - E-Mu XL-7 Command Station Owner's Manual

First Note Record

Pattern Length

60 E-MU Systems
Dialing the count-in field past 2 displays a quarter note icon, indicating
first note record. This mode could also be called "First Event Record" since
recording actually begins when the first event of any type is received.
T
01 REC+
Quan: 16
This feature has several modes of operation depending on the way you are
recording.
• If paused in record mode, the sequencer automatically starts rolling
when a recordable event is received.
• First note record mode also changes the way punch-in operations are
handled in "Replace Record" mode. These new modes are described on
page 66.
To Record a Pattern using First Note Record:
Select an "Empty Sequence".
1.
Press the Preset button, select a preset, then press the Pattern button.
2.
Press the Record button. The screen shown above appears:
3.
Move the cursor to the CntIn field and turn the data entry control
4.
clockwise until the quarter note appears.
Set up the track length, quantization and metronome as desired.
5.
Recording will begin when you play a note or turn a controller knob.
6.
You can set the length of a pattern from 1 to 32 bars, either before, after or
even during recording.
To Set the Pattern Length from the Main Pattern Screen
Select the pattern in Pattern mode.
1.
Move the cursor to the Length (Ln) field using the cursor keys.
2.
T
01 STOP
0
000
Set the Length of the pattern using the data entry control.
3.
Ln:04 Bar: 01:1
Met: off
Ln: 02
Start of IT
Pattern Mode
CntIn:
First Note Record Option
Bar: 01 . 1
Sequencer