E-Mu XL-7 Command Station Owner's Manual page 107

_ _ _ _
If you don't set the
destination track to Multi A or B,
the track will be rechannelized
into a single MIDI channel.
To Combine Multiple Tracks into a Single Multitrack:
Select the pattern you wish to edit and press the Pattern Edit button.
1.
Scroll to the Combine Selected Tracks To Clipboard screen shown
2.
below using the data entry control.
COMBINE SELECTED TRACKS
TO CLIPBOARD:
Move the cursor to the lower line of the display using either the left or
3.
right cursor key and press Enter. The following screen appears.
SELECT TRACKS
Press Enter When Done . . .
Select the tracks you wish to combine using the flashing Track Enable/
4.
Mute buttons.
Press Enter. The selected tracks will be copied to the clipboard.
5.
Set the destination track to Multi A or B. (Channel Assign screen.)
6.
Use the Paste Clipboard To Track function to paste the multichannel
7.
track into the existing pattern or into another pattern.
If you're pasting to another sequence use the Apply Clipboard Settings
8.
function (page 93) to copy the clipboard's volume, pan, preset, arpeg-
giator status, and send bus assignments to the selected track.
To Explode the Clipboard Data into Multiple Tracks:
Select the pattern you wish to edit and press the Pattern Edit button.
1.
Scroll to the Explode Clipboard To Tracks screen shown below using
2.
the data entry control.
EXPLODE CLIPBOARD TO
TRACKS:
Move the cursor to the lower line of the display using either the left or
3.
right cursor key and press Enter. The following screen appears.
- - PERFORM OPERATION? - -
Enter=Yes
Press Enter. The clipboard data will be divided up and merged with
4.
exiting pattern tracks.
do it
do it
Other=Cancel
Sequencer
Pattern Edit Menu
XL-7 Owners Manual 95