E-Mu XL-7 Command Station Owner's Manual page 120

108 E-MU Systems
Inserting a Pattern in the Middle of a Step (split)
Move the cursor beneath the Bar field and select the insert point
3.
between two step numbers.
Press the Repeat button. The step will be divided at the insert point.
4.
Please refer to the diagram below.
Insert
If you press Repeat between pattern change events,
a Pattern Play Event is inserted, splitting the previous
pattern. The linear track information remains intact.
S01
Song Track
Pattern Track
A
4 bars
Bar 1
After
A
If you want to change the pattern of a step, simply change it, then
5.
press Enter.
Inserting a Pattern at a Step (repeat)
Use the Track/Channel keys to select a Step number.
6.
Press the Repeat button (located below the controller knobs), then
7.
press Enter. The current step will be duplicated and all events
(including both step events and linear track events) will be slid forward
to accommodate the insertion of the new step (with length equal to the
duplicated step). Note that Delete still functions as is, only deleting the
step event, not any data or time.
Change the pattern to the desired pattern.
8.
Step Repeat
If you press Repeat at a pattern change event,
the Pattern Play Event is duplicated and the
linear track information is pushed forward in time.
Song Track
Pattern Track A
After
A
You can change the pattern after the Repeat operation.
Insert
Bar 7
S02 S03
B C
4 bars 4 bars
Bar 5 Bar 9 Bar 13
B B C
2 bars 2 bars
You can change the pattern after Insert.
Repeat
B
B
Song Mode
S04 S05
D
4 bars
Bar 17
STOP
D
C D
B C
Sequencer
D