E-Mu XL-7 Command Station Owner's Manual page 220

208 E-MU Systems
The Fade fields define the velocity crossfade range for the currently selected
layer. The first Fade field defines the Fade In range for the low velocity
value. The second defines the Fade Out range for the high velocity value.
0
Layer 1
Fade
36
With soft playing, Layer 1 sounds. As you play harder, Layer 1 gradually fades out and
Layer 2 fades in. When the keyboard is played hard, Layer 3 plays.
To Set Up a Velocity Crossfade Between Layers
Set the velocity fades so that layer 1 fades out with higher key velocity,
while layer 2 fades in. At a velocity of 64, the two sounds are equal volume.
You may want to adjust the fade in and fade out points to achieve a natural
sounding crossfade. These parameters vary depending on the sounds.
0
Layer 1
Layer 1
L1
VEL: LO
000
L2
VEL: LO
Defining the Velocity Crossfade Range
Velocity
Layer 2 Layer 3
Fade
96
Increasing Velocity
FADE
000
FADE
000 127
Preset Edit Menu
Layer 4
Switch
Layer 2
Layer 2
HIGH FADE
127 127
HIGH FADE
127 000
127
127