Connection Instructions; Basic Setup - E-Mu XL-7 Command Station Owner's Manual

Connection
Instructions

Basic Setup

   
The Right Main output
jack carries a mono mix of the
left and right channels when the
Left Main plug is not plugged in.
The Left Main output jack is a
stereo jack carrying both
channels when the right output
jack is empty.
16 E-MU Systems
Basic SetupBasic SetupBasic Setup
MIDI Sound Module
I O
VOLUME
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Power
Switch
110V/220V
50-60 Hz
(auto-select)
Power Switch & AC Receptacle
The AC power switch located on the rear panel is a "hard" power switch.
The front panel On/Off switch is a "soft" power switch that can be used to
turn power on and off when the XL-7 is rack mounted. There is no 110/220
Volt power selector switch since XL-7 utilizes an auto-switching power
supply which accepts from 100V-250V, 50-60Hz.
Outputs
In order to reproduce XL-7's wide dynamic range and frequency response,
use a high quality amplification and speaker system and a stereo setup is
highly desirable The headphone output is the same as the Main output
signal. The headphone jack is located on the left side of the front panel.
Footswitches 1 & 2
Connect one or more momentary footswitches for additional control. XL-7
auto-senses either normally-open or normally-closed switches when they
are plugged in. Their functions are programmable in the Controllers,
Footswitch menu and the Preset Edit, PatchCord menu.
SAMPLE TRIGGERS
TRANSPOSE MASTER/GLOBAL SAMPLE MANAGEMENT DIGITAL PROCESSING
INC/YES ABC
1 2
PRESET DEC/NO GHI JKL
MULTIMODE PRESET MANAGEMENT PRESET DEFINITION DYNAMIC PROCESING
4 5
ENTER
PRS TUV
7 8
ESCAPE
DRIVE SELECT LOAD SAVE AUDITION TRIGGER MODE QZ
0
MIDI In
Mixer
Amp
Speakers
The Headphone
DEF
3
MNO
Output is located
6
WXY
9
on the Front Panel
MIDI
Footswitch Footswitch
Setup
Basic Setup
USB for
E-Loader