While the
Pattern is
Stopped:
To Use Mute Hold while a Pattern is Stopped
Select a pattern.
1.
Change the track mutes as desired.
2.
Hold the Tap button and select a new pattern using the data entry
3.
control.
The track mute settings of the previous pattern will remain in effect.
4.
Direct
Pattern
Access:
To Use Mute Hold in conjunction with Direct Pattern Access
Follow the instructions on page 141 to set up direct pattern access.
1.
Select a pattern.
2.
Change the track mutes as desired.
3.
Hold the Tap button while selecting a new pattern using the trigger
4.
buttons. (Triggers must be selected in the Command Function section.)
The track mute settings of the previous pattern will remain in effect.
5.
Loop Section
See "Loop Section" on page 77.
Restart Pattern Fire Key
See "Restart/Pattern Fire Key" on page 57.
Pattern Change Tempo Hold
See "Pattern Change Tempo Hold" on page 162.
Hold TAP while selecting
a new Pattern with the
Data Entry Control
to hold the Mute settings.
Hold TAP while selecting
a new Pattern with the
Trigger Buttons to
hold the Mute settings.
Sequencer
Live Performance Features
XL-7 Owners Manual 131