Copy Preset Patchcords; Copy Arpeggiator Settings - E-Mu XL-7 Command Station Owner's Manual

Copy Preset
PatchCords
Copy Arpeggiator
Settings
The Copy Preset PatchCord command lets you copy the preset patchcord
settings from one preset location into the current preset location. The
preset information in the source location (the preset location from which
you want to copy) is not deleted from the original location, just copied to
the destination location.
COPY PRESET CORDS
1
020 Source Preset
To Copy a Preset PatchCord
Select the Preset you want to copy information into.
1.
Press the Save/Copy menu button.
2.
Move the cursor to the bottom line on the display.
3.
Select the preset containing the information you want to copy.
4.
Press the Home/Enter button.
5.
This function lets you copy the Arpeggiator settings from any ROM or RAM
preset location into the current RAM (User) preset.
COPY ARP SET from
0
052 syn: Syn Chaos
To Copy the Arpeggiator Settings
From the Preset View display, select the User Preset you want to copy
1.
the Arp setting into.
Press the Save/Copy menu button.
2.
Move the cursor to any of the fields on the bottom line on the display.
3.
Use the data entry control to select the preset you want to copy from.
4.
Press Enter when you have made your selection. The Enter LED is
5.
flashing indicating that XL-7 is waiting for your response.
The Arp Settings are copied into the current preset.
6.
Save/Copy Menu

Copy Preset PatchCords

User
XL-7
XL-7 Owners Manual 291