E-Mu XL-7 Command Station Owner's Manual page 76

   
Use the "Erase cc#
Events" function (page 85) to
erase controller data from the
pattern.
64 E-MU Systems
Press the Stop button twice to make sure the pattern starts at the
12.
beginning.
Press the Record button in Pattern mode to get ready to realtime
13.
record. The Play button LED will be flashing.
Press the Play button to begin recording. The controller knobs now
14.
adjust the volumes of all 16 channels.
Press Stop when you're finished recording.
15.
Real-time Panning
Select Pan Knob mode by pressing the Controller Function Select
16.
button.
Select Mix View mode by pressing the Mix button (if it's not already
17.
selected).
Turn the data entry control clockwise to select Ch Pan view.
18.
Press the Stop button twice to make sure the pattern starts at the
19.
beginning.
Press the Record button in Pattern mode to get ready to record. The
20.
Play button LED will be flashing.
Press the Play button to begin recording. The controller knobs now
21.
adjust the pan positions of all 16 tracks.
Press Stop when you're finished recording.
22.
Erasing Controller Data
The Erase Events function (page 85) can be used to erase controller
1.
data from a pattern.
Find the realtime controller number of the knob you wish to erase in
2.
the Controllers menu.
(Volume is always cc#7, and Pan is always cc#10. The numbers of the 16
controller knobs can vary.)
Press the Pattern Edit button.
3.
Scroll to Erase Events and move the cursor to the lower line of the
4.
display.
Select the realtime controller number from step 2.
5.
Press Enter to erase the controller data.
6.
Using Realtime Repeat
When this button is latched on (LED illuminated) while recording or
playing back a pattern (or song), played notes will repeat at the current
pattern quantize setting (page 57). Simultaneously changing the volume or
pitch as the sound repeats can generate some great effects.
Press the Record button once to go into Realtime Record mode.
1.
Set the Input Quantize resolution on the LCD to the desired rate.
2.
Press the Repeat button illuminating the LED.
3.
Sequencer
Pattern Mode